[efaccordion id=”01″] [efitems title=”What surfaces can Polish & Sealant and Gloss Highlighter be applied to?” text=”Paint (automotive-type), chrome, glass, plastic (non-porous only such as plexiglass), fiberglass and polished metal (not brushed).”]
[efitems title=”Besides autos, where else can I use Polish & Sealant and Gloss Highlighter?” text=”Motorcycles, ATVs, boats, PWC, snowmobiles, RVs and aircraft all respond beautifully to our products.”]
[efitems title=”Are Race Glaze products safe for clear coats?” text=”Yes. All six of our products are safe for clear coats and single stage paints.”]
[efitems title=”How often should I apply Polish & Sealant?” text=”For maximum effectiveness, we recommend two to three applications per year. For most users, this means a spring and fall application.”]
[efitems title=”What is the minimum recommended temperature for applying Polish & Sealant?” text=”55 F (13 C) is the absolute minimum. For best results, apply between 60 – 80 F.”]
[efitems title=”Can I apply Polish & Sealant to a car sitting in the sun?” text=”No – vehicles should be treated in a shaded area for best results.”]
[efitems title=”How long does an opened bottle of Polish & Sealant last? ” text=”
If stored properly (60 – 75 F) it should last two to three years. Always protect Race Glaze products from freezing and elevated temperatures. “]
[efitems title=”How much Polish & Sealant should I apply to my vehicle? ” text=”
We recommend applying a “dime size” or less amount to one section at a time of approximately 2’ x 2’ in size. “]
[efitems title=”How long should I wait before wiping off Polish & Sealant? ” text=”
Polish & Sealant will dry to a haze in approximately 5 minutes. It doesn’t hurt to leave it for longer periods before wiping off. “]
[efitems title=”What do you recommend for applying and removing Polish & Sealant? ” text=”
A small, foam-pad applicator that is lightly dampened works best for application. For removal, micro-fiber works beautifully. “]
[efitems title=”How do I best preserve the appearance and protection after applying Polish & Sealant? ” text=”
Use Gloss Highlighter regularly after washing and drying your vehicle. This quick and easy to apply spray-on product contains many of the same ingredients found in Polish & Sealant to provide continual protection. “]
[efitems title=”What surfaces can I use Trim & Leather Renewer on? ” text=”
Vinyl, leather, porous plastic and rubber located on the interior and exterior of a vehicle all respond beautifully. Do not apply to paint, glass or fabric. “]
[efitems title=”Does Trim & Leather Renewer leave a greasy-looking, slippery surface? ” text=”
No – it dries to a non-oily appearance that isn’t slippery. “]
[efitems title=”Can Trim & Leather Renewer be used as a tire dressing? ” text=”
No – we do not recommend this product for tires. “]
[/efaccordion]